Thanks for the video! What tool are you using to remove the spark plugs in such a tight space? Every other video I have seen requires the wipers and firewall to be removed to gain access.
He dropped the spark plugs into the comparment may damage the spark tips, so why not using a rubber tube attatch to the tip and gently lower it down until it is in place .
Great video! My 14mm plug socket got stuck on top of the spark plug. I can't remove the socket. I think it lodge skew on top of the spark plug. Even glued the extension bar to the socket, but no luck. Any other tips please. 🙏
@@autodocuk @autodocuk It's fine. I managed to remove the spark plug socket from within the spark plug housing by glueing the extension bar to the socket. I left it overnight so that the glue can set properly 🙂.
Hi guys. My 2013 Ford Figo wouldn't start this morning, it eventually caught on after several attempts which is a first. Someone said my spark plugs might be wet, could this be true? If so, what would be the cause? When running it also sounds as if the exhaust is leaking. Please advice
Thank you for your question. There are several reasons for this case with the engine. Judging by your description, the crankshaft or camshaft sensor most likely faulty is and we recommend diagnosing them at the special service center of your car. Best Regards, Autodoc team
@@autodocuk DENSO sparkplugs specifically said NO Anti-sieze used. It has really good Nickle plating and will never stuck. Adding anti-seize may cause broken tread and wrong torque.
Brilliant design 😂 make the plugs as difficult as possible to get to - so amybody at home with standard socket set and rachet has to buy more tools - twats
![How to change spark plug on TOYOTA PRIUS 2 (NHW20) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/B6VgPSx49bI/mqdefault.jpg)
![How to change spark plug on TOYOTA PRIUS 2 (NHW20) [TUTORIAL AUTODOC]](/img/tr.png)
⚠ Attention! The mistake was made in the video at 4:44 minutes. Use the spark plug socket #14.
Thanks for the video! What tool are you using to remove the spark plugs in such a tight space? Every other video I have seen requires the wipers and firewall to be removed to gain access.
He dropped the spark plugs into the comparment may damage the spark tips, so why not using a rubber tube attatch to the tip and gently lower it down until it is in place .
Thank you for your comment!
You are absolutely right, we have already fixed this mistake in the new videos.
Best Regards,
Autodoc team
i got 14mm for the socket but them video references #16 , what does #16 mean ? , thanks for the video
Great video!
My 14mm plug socket got stuck on top of the spark plug. I can't remove the socket. I think it lodge skew on top of the spark plug. Even glued the extension bar to the socket, but no luck. Any other tips please. 🙏
From the description it is difficult to advise anything, we recommend to contact the service.
@@autodocuk @autodocuk It's fine. I managed to remove the spark plug socket from within the spark plug housing by glueing the extension bar to the socket. I left it overnight so that the glue can set properly 🙂.
Orridium Recommended?
Iridium or platinum spark plugs are recommended.
Hi guys.
My 2013 Ford Figo wouldn't start this morning, it eventually caught on after several attempts which is a first. Someone said my spark plugs might be wet, could this be true? If so, what would be the cause? When running it also sounds as if the exhaust is leaking. Please advice
Thank you for your question.
There are several reasons for this case with the engine.
Judging by your description, the crankshaft or camshaft sensor most likely faulty is and we recommend diagnosing them at the special service center of your car.
Best Regards,
Autodoc team
What is the spray you use on 7:26?
Thank you for your question.
The requested item we used is 3110 Liqui Moly.
Best Regards,
Autodoc team
@@autodocuk DENSO sparkplugs specifically said NO Anti-sieze used. It has really good Nickle plating and will never stuck. Adding anti-seize may cause broken tread and wrong torque.
Is it best to change these with the engine hot or cold.
Required to change on a cold engine.
Brilliant design 😂 make the plugs as difficult as possible to get to - so amybody at home with standard socket set and rachet has to buy more tools - twats